EV Bay Marking

Nationwide · England, Scotland & Wales

EV Bay Marking across the UK

Clear, durable EV charging bay markings that keep chargers free.

In short

EV Bay Marking is the application of lines, coloured infills, charging symbols and text to parking spaces reserved for electric vehicle charging. Usually done in thermoplastic or anti-slip coatings, it makes charging bays easy to spot, discourages non-electric vehicles from parking there, and sets out space around chargers for cables, access and accessible charging.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free EV Bay Marking quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

EV Bay Marking arranges the marking of electric vehicle charging spaces for workplaces, retail car parks, hotels, residential developments, fleets and public car parks across the UK. We match you with vetted, insured line marking crews who apply green bay outlines, solid or part-coloured infills, preformed EV symbols and text, and who can work around newly installed chargers without damaging them.

A charger is only useful if electric vehicles can actually reach it. When bays are unmarked or poorly marked, petrol and diesel cars park in them, drivers miss them altogether, and charging cables trail across walkways. Clear, consistent EV bay markings solve that. Whether you are marking two bays outside an office or a large charging hub, we help you plan and finish the job properly.

How it works

  1. Site review

    Send photos, a site plan and charger positions, or arrange a visit. The specialist checks surface type, bay sizes, kerbs and access, and confirms whether chargers are already installed or still planned.

  2. Marking plan and quote

    You receive a quote covering bay outlines, infills, symbols, text and any line removal. For larger sites, a layout drawing shows bay positions, numbering and routes for drivers and pedestrians.

  3. Scheduling

    Work is booked around opening hours and charger installation. Ideally markings go down after chargers and bollards are fitted, so bays line up with units and cables reach comfortably.

  4. Marking

    Bays are cleared, the surface cleaned and dried, and old lines removed if needed. Green lines, infills, symbols and text are applied, with anti-slip aggregate or glass beads as specified.

  5. Final check and handover

    The crew checks bay positions, symbol placement and finish with you. Bays can usually reopen once thermoplastic cools or coatings have cured, typically within a few hours at most.

EV Bay Marking prices

EV bay marking is usually priced per bay, with options for outline only, part infill or full infill, plus symbols and text. Small jobs carry a minimum charge to cover the crew and kit. Full coloured infills cost the most because of the coating material and preparation needed. These are typical UK guide prices for 2026.

JobGuide priceNotes
Green bay outline (thermoplastic)£25–£50 per bayGreen lines with glass beads on sound asphalt; lower rates apply to larger numbers of bays.
Preformed EV symbol£45–£90 eachCar-and-plug or plug symbol in thermoplastic, fused to the surface.
EV CHARGING ONLY text£60–£120 per bayElongated thermoplastic lettering positioned for visibility from the approach.
Full green bay infill (anti-slip coating)£180–£350 per baySurface preparation, coloured coating and anti-slip aggregate for a standard bay.
Removal of old bay lines£3–£8 per linear metreGrinding or blasting old lines when converting standard bays to EV use.
Minimum charge for small jobsfrom £300Covers crew, boilers and materials for a small number of bays.

What affects the price →

Who we work for

Workplaces and office parks

Employers adding staff charging need clear bays that stop non-EV drivers taking spaces. Many mark bays as part of a wider charger installation or workplace grant-funded project.

Retailers and hospitality

Supermarkets, retail parks, hotels and pubs use visible green bays to attract EV drivers, often marking them with infills so they are obvious from the road and entrance.

Residential developers and managing agents

New developments must often provide EV charging, and managing agents of existing blocks are adding chargers. Both need bays marked clearly, often with numbering for allocated spaces.

Chargepoint installers

Installers bring in line marking crews to finish projects with green bays, symbols and repaired markings after cabling works, so the site is handed over complete.

Fleet depots and public car parks

Fleet operators and car park owners with many chargers need layouts, numbering and wayfinding so vehicles get to the right charger quickly and safely.

Rules and standards that apply

  • In England, Approved Document S of the Building Regulations requires charge points or cable routes for many new residential and non-residential buildings and some major renovations with associated parking.
  • PAS 1899:2022 is the British Standards Institution specification for accessible public charge points, covering bay dimensions, kerbs, approach space and the position of charging equipment.
  • The Traffic Signs Regulations and General Directions 2016 include prescribed signs for electric vehicle charging bays on public roads; private car parks are not bound by them but often use similar wording.
  • The Equality Act 2010 requires service providers to make reasonable adjustments for disabled people, which is relevant when planning publicly accessible charging bays.

How to choose the right ev bay marking company

  • Ask whether the crew will mark bays after the chargers and bollards are installed so positions line up.
  • Check they offer both outline and infill options and explain the difference in durability and cost.
  • Make sure anti-slip aggregate is included for any coloured infill used by pedestrians.
  • Confirm how old white lines will be removed when converting standard bays.
  • Ask if they can advise on accessible charging bay layouts in line with current guidance.
  • Check they carry public liability insurance and will provide risk assessments for working near live chargers.

Frequently asked questions

How much does EV bay marking cost?

A green thermoplastic bay outline typically costs £25 to £50 per bay in 2026, with EV symbols around £45 to £90 each. Full green infills with anti-slip coating cost about £180 to £350 per bay. Most contractors have a minimum charge from around £300 for small jobs.

What colour are EV charging bays in the UK?

Green is the most widely used colour for EV charging bays in the UK, either as bay lines, a full infill or a coloured strip. There is no single legal colour requirement for private car parks, but green has become a recognised convention that drivers associate with charging.

Can I stop petrol cars parking in EV bays?

Clear markings help a lot, but on private land enforcement normally relies on signage setting out the terms of parking and a parking management arrangement. Markings and signs together give the best result. On public roads, enforcement depends on the council's traffic regulation order.

Should EV bays be marked before or after chargers are installed?

After is usually best. Once chargers and protective bollards are in place, the crew can position bays so cables reach comfortably and vehicles are not blocked. Marking first risks redoing lines if the charger position changes or trenching damages the surface.

What size should an EV charging bay be?

Most EV bays are the same size as standard bays, commonly 2.4 m by 4.8 m. Wider bays of around 2.7 m or more help drivers manage cables. Accessible charging bays need extra space for transfer, as set out in PAS 1899 guidance.

What is an accessible EV charging bay?

An accessible EV charging bay is wider, with a transfer zone, level surface and no kerb between the vehicle and charger, so disabled drivers can use it independently. The charger screen, socket and cable must also be within reach. PAS 1899:2022 gives detailed guidance.

How long do EV bay markings last?

Thermoplastic EV bay lines and symbols typically last three to five years in a busy car park. Anti-slip coloured infills can last a similar time but wear faster where cars turn. Refreshing markings periodically keeps bays obvious and discourages misuse.

Can you mark EV bays on block paving?

Yes, but the method differs. Block paving moves slightly, so flexible paints or coatings designed for paving are used rather than thick thermoplastic. Alternatively, coloured blocks can be laid in the bay. A specialist will recommend the best option for your surface.

See all FAQs →

Get a free ev bay marking quote

Tell us what you need and we'll come back with a clear price.

Request a quote