EV Bay Marking
Re-Marking and Bay Conversion
Convert existing bays to EV use, refresh worn green markings and remove old lines cleanly when layouts change.

What's involved
Many EV bays are created by converting standard spaces. Crews remove or overlay the old white lines, set out the new bay positions to suit the chargers, then apply green lines, infills and symbols. Where layouts change, old markings are removed by grinding, shot blasting or water jetting rather than painted over in black, which wears and causes confusion. Existing EV markings wear just like any other markings, especially where vehicles turn in and out, so refreshing faded green lines and symbols every few years keeps bays obvious. Crews also fix markings damaged during charger installation, for example where cable trenches have been reinstated across bays. Conversion is usually done in a few hours, ideally outside busy periods. Let the crew know about any planning conditions or lease requirements that set how many EV bays must be provided on site.
How we handle it
Site review
Send photos, a site plan and charger positions, or arrange a visit. The specialist checks surface type, bay sizes, kerbs and access, and confirms whether chargers are already installed or still planned.
Marking plan and quote
You receive a quote covering bay outlines, infills, symbols, text and any line removal. For larger sites, a layout drawing shows bay positions, numbering and routes for drivers and pedestrians.
Scheduling
Work is booked around opening hours and charger installation. Ideally markings go down after chargers and bollards are fitted, so bays line up with units and cables reach comfortably.
Marking
Bays are cleared, the surface cleaned and dried, and old lines removed if needed. Green lines, infills, symbols and text are applied, with anti-slip aggregate or glass beads as specified.
Final check and handover
The crew checks bay positions, symbol placement and finish with you. Bays can usually reopen once thermoplastic cools or coatings have cured, typically within a few hours at most.
Price guide
EV bay marking is usually priced per bay, with options for outline only, part infill or full infill, plus symbols and text. Small jobs carry a minimum charge to cover the crew and kit. Full coloured infills cost the most because of the coating material and preparation needed. These are typical UK guide prices for 2026.
- Full green bay infill (anti-slip coating): £180–£350 per bay. Surface preparation, coloured coating and anti-slip aggregate for a standard bay.
- EV CHARGING ONLY text: £60–£120 per bay. Elongated thermoplastic lettering positioned for visibility from the approach.
- Preformed EV symbol: £45–£90 each. Car-and-plug or plug symbol in thermoplastic, fused to the surface.
Questions about re-marking and bay conversion
Should EV bays be marked before or after chargers are installed?
After is usually best. Once chargers and protective bollards are in place, the crew can position bays so cables reach comfortably and vehicles are not blocked. Marking first risks redoing lines if the charger position changes or trenching damages the surface.
Can I stop petrol cars parking in EV bays?
Clear markings help a lot, but on private land enforcement normally relies on signage setting out the terms of parking and a parking management arrangement. Markings and signs together give the best result. On public roads, enforcement depends on the council's traffic regulation order.
What colour are EV charging bays in the UK?
Green is the most widely used colour for EV charging bays in the UK, either as bay lines, a full infill or a coloured strip. There is no single legal colour requirement for private car parks, but green has become a recognised convention that drivers associate with charging.
Other services
Green EV Bay Outlines
Bright green thermoplastic bay lines that instantly set EV charging spaces apart from standard white-lined bays.
Coloured Bay Infills
Full or part green infills using anti-slip coatings or thermoplastic, making EV bays unmistakable from a distance.
EV Symbols and Charging Text
Preformed thermoplastic plug symbols, car-and-plug logos and text such as EV CHARGING ONLY applied in the bay.
Accessible EV Charging Bays
Wider charging bays with transfer zones and level access, designed so disabled drivers can reach and use the charger.
EV Hub Layouts and Wayfinding
Layout design and marking for multi-charger hubs, including arrows, queuing lanes, pedestrian routes and bay numbering.
Re-Marking and Bay Conversion near you
Get a free ev bay marking quote
Tell us what you need and we'll come back with a clear price.
Request a quote