EV Bay Marking

EV Bay Marking

Accessible EV Charging Bays

Wider charging bays with transfer zones and level access, designed so disabled drivers can reach and use the charger.

Free EV Bay Marking quote

No obligation. We only use your details to reply about this job.

Accessible EV Charging Bays — EV Bay Marking

What's involved

Standard EV bays often leave too little room for a wheelchair user to get out of a car and reach the charger. Accessible charging bays usually follow the same principles as accessible parking: a wider bay with a clear transfer zone, level ground, no kerb between the bay and the charger, and a charger positioned at a reachable height. PAS 1899:2022 sets out specific guidance on accessible public charge points, including bay dimensions and the space around the unit. Crews mark the bay, hatch the transfer zone and apply an EV symbol alongside the wheelchair symbol. Bollards protecting chargers should not block the approach. It is easiest to plan accessible bays before chargers are installed, so the charger position, kerbs and markings all work together. If chargers are already in place, a specialist can review the layout and suggest the best bay to convert.

How we handle it

  1. Site review

    Send photos, a site plan and charger positions, or arrange a visit. The specialist checks surface type, bay sizes, kerbs and access, and confirms whether chargers are already installed or still planned.

  2. Marking plan and quote

    You receive a quote covering bay outlines, infills, symbols, text and any line removal. For larger sites, a layout drawing shows bay positions, numbering and routes for drivers and pedestrians.

  3. Scheduling

    Work is booked around opening hours and charger installation. Ideally markings go down after chargers and bollards are fitted, so bays line up with units and cables reach comfortably.

  4. Marking

    Bays are cleared, the surface cleaned and dried, and old lines removed if needed. Green lines, infills, symbols and text are applied, with anti-slip aggregate or glass beads as specified.

  5. Final check and handover

    The crew checks bay positions, symbol placement and finish with you. Bays can usually reopen once thermoplastic cools or coatings have cured, typically within a few hours at most.

Price guide

EV bay marking is usually priced per bay, with options for outline only, part infill or full infill, plus symbols and text. Small jobs carry a minimum charge to cover the crew and kit. Full coloured infills cost the most because of the coating material and preparation needed. These are typical UK guide prices for 2026.

  • Removal of old bay lines: £3–£8 per linear metre. Grinding or blasting old lines when converting standard bays to EV use.
  • Full green bay infill (anti-slip coating): £180–£350 per bay. Surface preparation, coloured coating and anti-slip aggregate for a standard bay.
  • EV CHARGING ONLY text: £60–£120 per bay. Elongated thermoplastic lettering positioned for visibility from the approach.

Questions about accessible ev charging bays

What colour are EV charging bays in the UK?

Green is the most widely used colour for EV charging bays in the UK, either as bay lines, a full infill or a coloured strip. There is no single legal colour requirement for private car parks, but green has become a recognised convention that drivers associate with charging.

What size should an EV charging bay be?

Most EV bays are the same size as standard bays, commonly 2.4 m by 4.8 m. Wider bays of around 2.7 m or more help drivers manage cables. Accessible charging bays need extra space for transfer, as set out in PAS 1899 guidance.

What is an accessible EV charging bay?

An accessible EV charging bay is wider, with a transfer zone, level surface and no kerb between the vehicle and charger, so disabled drivers can use it independently. The charger screen, socket and cable must also be within reach. PAS 1899:2022 gives detailed guidance.

Get a free ev bay marking quote

Tell us what you need and we'll come back with a clear price.

Request a quote