EV Bay Marking

EV Bay Marking FAQs

Straight answers to the questions we're asked most.

How much does EV bay marking cost?

A green thermoplastic bay outline typically costs £25 to £50 per bay in 2026, with EV symbols around £45 to £90 each. Full green infills with anti-slip coating cost about £180 to £350 per bay. Most contractors have a minimum charge from around £300 for small jobs.

What colour are EV charging bays in the UK?

Green is the most widely used colour for EV charging bays in the UK, either as bay lines, a full infill or a coloured strip. There is no single legal colour requirement for private car parks, but green has become a recognised convention that drivers associate with charging.

Can I stop petrol cars parking in EV bays?

Clear markings help a lot, but on private land enforcement normally relies on signage setting out the terms of parking and a parking management arrangement. Markings and signs together give the best result. On public roads, enforcement depends on the council's traffic regulation order.

Should EV bays be marked before or after chargers are installed?

After is usually best. Once chargers and protective bollards are in place, the crew can position bays so cables reach comfortably and vehicles are not blocked. Marking first risks redoing lines if the charger position changes or trenching damages the surface.

What size should an EV charging bay be?

Most EV bays are the same size as standard bays, commonly 2.4 m by 4.8 m. Wider bays of around 2.7 m or more help drivers manage cables. Accessible charging bays need extra space for transfer, as set out in PAS 1899 guidance.

What is an accessible EV charging bay?

An accessible EV charging bay is wider, with a transfer zone, level surface and no kerb between the vehicle and charger, so disabled drivers can use it independently. The charger screen, socket and cable must also be within reach. PAS 1899:2022 gives detailed guidance.

How long do EV bay markings last?

Thermoplastic EV bay lines and symbols typically last three to five years in a busy car park. Anti-slip coloured infills can last a similar time but wear faster where cars turn. Refreshing markings periodically keeps bays obvious and discourages misuse.

Can you mark EV bays on block paving?

Yes, but the method differs. Block paving moves slightly, so flexible paints or coatings designed for paving are used rather than thick thermoplastic. Alternatively, coloured blocks can be laid in the bay. A specialist will recommend the best option for your surface.

Do I need planning permission to mark EV bays?

Marking bays on an existing private car park does not normally need planning permission. Installing chargers may have planning or permitted development considerations, and new buildings may need to provide charging under Building Regulations, so check with your installer or planning team.

How long does EV bay marking take?

A handful of bays with outlines and symbols can be completed in one to three hours. Full infills take longer because coatings need preparation and curing time. Large charging hubs may take a night or two to complete.

Can you convert existing parking bays into EV bays?

Yes. Crews remove or overlay the old white lines, set out new bays to suit the chargers, and apply green lines, infills and symbols. Removing old lines properly avoids confusion from ghost markings showing through.

What should EV bay text say?

Common wording includes EV CHARGING ONLY, ELECTRIC VEHICLES ONLY or ELECTRIC VEHICLE CHARGING. Keep it short so it can be laid in elongated letters that read well from a car. Match the wording to your signage and parking terms.

Get a free ev bay marking quote

Tell us what you need and we'll come back with a clear price.

Request a quote