Guide · Businesses · 3 min read · Updated 17 November 2026
EV Bay Marking Cost UK: Prices Per Charging Bay
Short answer
A green thermoplastic EV bay outline typically costs £25–£50 per bay in the UK in 2026. A preformed EV symbol adds £45–£90 and EV CHARGING ONLY text £60–£120 per bay. A full green anti-slip infill costs £180–£350 per bay. Removing old lines when converting bays is £3–£8 per metre, and small jobs carry a minimum charge from £300.
Typical EV bay marking prices
EV bay marking is usually priced per bay, with a choice of finish levels. The simplest option is a green outline, which sets charging bays apart from white-lined standard bays. Adding a symbol and text makes the purpose clear even when a car is partly covering the markings. A full coloured infill is the most visible option and the most expensive, because it uses far more material and needs careful surface preparation.
The figures below are typical UK guide prices for 2026, assuming a sound asphalt surface and a reasonable number of bays done in one visit.
| Item | Typical UK price (2026) | Notes |
|---|---|---|
| Green bay outline (thermoplastic) | £25–£50 per bay | Green lines with glass beads |
| Preformed EV symbol | £45–£90 each | Car-and-plug or plug symbol fused to the surface |
| EV CHARGING ONLY text | £60–£120 per bay | Elongated thermoplastic lettering |
| Full green bay infill (anti-slip coating) | £180–£350 per bay | Preparation, coloured coating and anti-slip aggregate |
| Removal of old bay lines | £3–£8 per linear metre | Grinding or blasting old lines |
| Minimum charge for small jobs | from £300 | Crew, boilers and materials |
Example packages
Most sites choose one of three broad levels. An outline-only finish suits staff car parks and depots where drivers know which bays are for charging. Outline plus symbol and text suits customer car parks, where visitors need to recognise EV bays at a glance. Full infills suit high-profile locations such as retail parks, hotels and public charging hubs, where the bays need to stand out from a distance and deter non-electric vehicles.
Adding the items together gives a rough per-bay figure. For example, an outline with a symbol and text typically comes to roughly £130–£260 per bay before any removal or minimum charge, while a full infill with symbol and text costs more.
- Outline only: lowest cost, suits staff and fleet bays.
- Outline plus symbol: clear at a glance, moderate cost.
- Outline, symbol and text: clearest for visitors and customers.
- Full infill plus symbol: most visible, highest cost.
- Conversion work: add line removal where standard bays are repurposed.
What affects the price
The number of bays has the biggest effect, because the cost of bringing the crew, boilers and materials to site is spread across more spaces. Two bays outside a small office cost far more per bay than twenty at a supermarket. That is why the minimum charge from £300 often applies to small installations.
Surface type matters too. Concrete and block paving need different products or primers, and a full infill on a poor surface needs more preparation. Out-of-hours working on busy sites usually adds a premium. Removing old markings and repairing surfaces after charger installation, where groundworks have left patches and cut lines, adds time and cost.
Colour choice can affect price slightly. Green thermoplastic and coloured coatings are specialist products that cost more than standard white, and some suppliers carry limited stock. If you want a particular shade to match a brand or an existing site, mention it early so the contractor can source the right material and price it accurately.
Timing the marking with charger installation
Charge point installation often involves trenching for cables and building bases for chargers, which leaves reinstated strips of asphalt or concrete across the bays. Marking should be done after that reinstatement has settled and the surface is sound. Lining over fresh or uneven patches can lead to cracking and early wear.
Coordinate with the charge point installer from the start. Agree where chargers, bollards and protection barriers will go, then set out bays around them. That avoids lines running under a charger base or bays too short for a car once a wheel stop is fitted.
It also helps to think about how the bays will be used day to day. Rapid chargers at a retail park see many short visits and heavy wear at the bay entrance, while workplace chargers see fewer, longer stays. That affects whether a full infill is worth the cost, how often markings will need refreshing and where symbols should sit so they stay visible between cars.
Durability and maintenance
Thermoplastic outlines, symbols and text bond to asphalt and last several years under normal car park traffic. Coloured infills wear fastest where tyres turn, especially at bay entrances. Anti-slip aggregate helps grip but can wear down in heavily used bays.
Plan to inspect EV bays alongside the rest of the car park and refresh worn markings before they fade too far. Clear, bright markings help keep bays free for electric vehicles, which matters if you charge for electricity or rely on chargers being available for your fleet.
Getting an accurate quote
Share a site plan or photos showing the number of bays, charger positions and the surface type. Say which finish you want for each bay and whether any existing white lines need removing. If accessible charging bays are planned, mention them, because they need more space and a different layout.
Ask for a per-bay breakdown so you can compare options. A good quote shows the material, colour, whether glass beads and anti-slip aggregate are included, and when the work can be done.
Check whether the price is fixed for the agreed scope.
Questions people also ask
How much does it cost to mark an EV charging bay?
A green thermoplastic outline typically costs £25–£50 per bay in the UK in 2026. Adding an EV symbol costs £45–£90 and EV CHARGING ONLY text £60–£120. A full green anti-slip infill is £180–£350 per bay. Small jobs carry a minimum charge from about £300 to cover the crew and kit.
Is a full green infill worth the extra cost?
For public-facing car parks where you want EV bays to stand out and deter other drivers, often yes. Full infills are visible from a distance and hard to ignore. For staff or fleet car parks where drivers already know the bays, a green outline with a symbol is usually enough and costs far less.
Should EV bays be marked before or after chargers are installed?
After the charger bases, cable trenches and any reinstatement are complete and the surface has settled. Marking first risks damage from groundworks, and lines laid over fresh patches can crack. Plan the layout with the installer early so bays, chargers and bollards fit together properly.
Written and checked by the EV Bay Marking team. Read our editorial policy.
More guides
What Colour Should EV Charging Bays Be in the UK?
Green is the most widely used colour for EV charging bays in the UK, either as a green outline or a full green infill, often with a white or green…
Accessible EV Charging Bays: PAS 1899 Guide
PAS 1899:2022 is the British Standards Institution specification for accessible public charge points. It covers bay dimensions, kerbs, approach space…
How to Stop Non-Electric Cars Parking in EV Bays
The most effective way to stop non-electric cars using EV bays is to make the bays impossible to miss and back them with clear terms. Use green…
Planning an EV Charging Car Park Layout
Plan EV charging layouts around charger positions, cable reach and vehicle access before any groundworks. Allow for accessible bays following PAS…
Get a free ev bay marking quote
Tell us what you need and we'll come back with a clear price.
Request a quote