Guide · Businesses · 3 min read · Updated 17 November 2026
Accessible EV Charging Bays: PAS 1899 Guide
Short answer
PAS 1899:2022 is the British Standards Institution specification for accessible public charge points. It covers bay dimensions, kerbs, approach space around the vehicle and the position and height of charging equipment, so disabled drivers can reach and use the charger. Accessible charging bays need more space than standard bays, a level route around the vehicle and clear marking, signage and protection for the charger.
Why accessible charging bays matter
A standard charging bay often works poorly for disabled drivers. The charger may be mounted behind a high kerb, the cable may be heavy and short, and parked cars on either side may leave no space to get out or move a wheelchair to the charger. Without planning, a charging bay can be unusable for many people.
The Equality Act 2010 requires service providers to make reasonable adjustments for disabled people, which is relevant when planning publicly accessible charging bays. PAS 1899:2022 gives a clear specification for doing that well.
Disabled drivers are increasingly choosing electric vehicles, and many rely on public charging because they do not have off-street parking at home. If public chargers cannot be used, those drivers are effectively excluded from charging at your site. Planning accessible bays from the outset avoids that and opens your chargers to more customers.
What PAS 1899 covers
PAS 1899:2022 was developed with government and disability groups to set out how public charge points can be made accessible. It addresses the space around the bay, the route from the vehicle to the charger, the charger's height and controls, kerbs and street furniture, and information such as signs and instructions.
It defines different levels of accessibility, so operators can see how a site measures up. Anyone designing a new charging site should read the specification itself for the exact dimensions and requirements, rather than relying on summaries.
| Area covered | What it addresses |
|---|---|
| Bay dimensions | Extra space beside and behind the vehicle |
| Kerbs and surfaces | Level, firm routes without high kerbs between car and charger |
| Charger position | Height of controls, screens and sockets |
| Cables | Reach and weight so they can be handled |
| Information | Clear signs, instructions and wayfinding |
Planning the bay layout
An accessible charging bay needs more space than a standard bay, so the driver or passenger can get out and move to the charger with a wheelchair or walking aid. The charger should be reachable without stepping up a kerb or squeezing between vehicles. Bollards and protection barriers must protect the charger without blocking the route to it.
Think about the position of the charge port on different vehicles. Some cars charge at the front, some at the rear and some on either side, so the layout should allow cables to reach without being dragged across a transfer zone or trip route.
- Allow extra width and length beyond a standard bay, following PAS 1899.
- Provide a level, firm route from every side of the vehicle to the charger.
- Avoid high kerbs or plinths between the bay and the charger.
- Position bollards so they protect the charger without blocking access.
- Keep controls and screens at a reachable height.
- Mark transfer zones clearly with hatching.
Marking accessible charging bays
Marking should make the bay easy to find and keep the extra space clear. A typical approach combines green bay lines or an infill to show the charging purpose with hatched transfer zones to protect the extra space. An EV symbol shows that the bay is for charging, and many sites add an accessibility symbol where the bay is designated for disabled drivers.
In 2026, green outlines typically cost £25–£50 per bay, EV symbols £45–£90 each and full green infills £180–£350 per bay. Hatching and accessibility symbols are priced in addition. Small jobs carry a minimum charge from about £300.
Surface finish matters for accessibility too. Anti-slip coatings help wheelchair users and people with walking aids move safely around the vehicle in wet weather, but heavily textured finishes can make wheeling harder. Choose a finish that grips without being rough, and keep transfer zones free of drainage gullies, kerbs and loose surfaces. Make sure the area is well lit so drivers can see the charger controls and markings after dark.
Designated or accessible-but-shared?
There are two common approaches. Some sites designate a bay for disabled drivers who need it, much like a Blue Badge bay. Others make one or more bays fully accessible but open to all EV drivers, so the extra space is available to anyone who needs it, while avoiding a charger sitting empty.
Each approach has pros and cons, and the right choice depends on demand at your site. Whichever you choose, signs should explain clearly who can use the bay and on what terms.
Working with your installer
Accessibility should be designed in from the start, not added afterwards. Moving a charger base or rebuilding a kerb later is far more expensive than getting the layout right before groundworks. Ask your charge point installer how the design meets PAS 1899, and share the layout with your line marking contractor so bays and hatching match the charger positions.
Once installed, check the bay in use. Watch whether drivers can reach the charger easily, whether cables reach comfortably and whether the hatched zones stay clear.
Feedback from disabled drivers who use the site is valuable. If people report problems reaching the charger or getting out of the car, adjust the layout, bollards or markings to fix them.
Questions people also ask
What is PAS 1899?
PAS 1899:2022 is a specification published by the British Standards Institution for accessible public electric vehicle charge points. It covers bay dimensions, kerbs, approach space, charger height and controls, cables and information, helping operators design charging sites that disabled drivers can use independently.
Is PAS 1899 a legal requirement?
PAS 1899 is a specification rather than a law. However, the Equality Act 2010 requires service providers to make reasonable adjustments for disabled people, and following PAS 1899 is a recognised way to plan accessible public charging. Funders, planning authorities or clients may also require it for specific projects.
How much space does an accessible charging bay need?
More than a standard bay, with extra room beside and behind the vehicle so a wheelchair user can get out and reach the charger. PAS 1899:2022 sets out the recommended dimensions, so designers should use the specification itself. The layout also depends on charger position and kerb arrangements.
Written and checked by the EV Bay Marking team. Read our editorial policy.
More guides
EV Bay Marking Cost UK: Prices Per Charging Bay
A green thermoplastic EV bay outline typically costs £25–£50 per bay in the UK in 2026. A preformed EV symbol adds £45–£90 and EV CHARGING ONLY text…
What Colour Should EV Charging Bays Be in the UK?
Green is the most widely used colour for EV charging bays in the UK, either as a green outline or a full green infill, often with a white or green…
How to Stop Non-Electric Cars Parking in EV Bays
The most effective way to stop non-electric cars using EV bays is to make the bays impossible to miss and back them with clear terms. Use green…
Planning an EV Charging Car Park Layout
Plan EV charging layouts around charger positions, cable reach and vehicle access before any groundworks. Allow for accessible bays following PAS…
Get a free ev bay marking quote
Tell us what you need and we'll come back with a clear price.
Request a quote